Ph. D. : 2008

Department of Science of Resources and Environment

Tokyo University of Agriculture and Technology (TUAT), Tokyo, Japan.

M. Sc. : 2004

Pulp and Paper Technology
Asian Institute of Technology (AIT), Thailand.

M. Sc. : 2002

Forestry and Wood Technology Discipline
Khulna University (KU), Bangladesh.

B. Sc. (Hons.) : 1999

Forestry and Wood Technology Discipline
Khulna University (KU), Bangladesh.

Biodegradability, non-resistant to fire and weathering conditions, large variations in quality, drying, non-availability, etc are the major challenges faced by the plant biomass and are gradually more difficult to manage. At the same time, everyday people are becoming more dependent on environmentally friendly biomass materials because of environmental concerns. My research focuses on developing techniques for increasing the service life of plant biomass materials against the deteriorating agents, production of valuable materials from the waste and lesser/non-used materials, and choosing the right materials for their living conditions having the appropriate properties for a particular use. The woody and non-woody resources dependent people are also part of my research interest. More specifically, I am interested in the following areas -

• Transformation of woody and non-woody materials
  
• Life and livelihood of the forest resources dependent people

Current Research Project/Collaboration

    Academic Positions

    2014 - to date: Professor, Forestry and Wood Technology Discipline, Khulna University, Bangladesh.

    2010-2014: Associate Professor, Forestry and Wood Technology Discipline, Khulna University, Bangladesh.

    2004-2009: Assistant Professor, Forestry and Wood Technology Discipline, Khulna University, Bangladesh.
    2002-2004: Lecturer, Forestry and Wood Technology Discipline, Khulna University, Bangladesh.

     Professional Experiences/Training

    

    

    Pro Vice-Chancellor: December 2024 to till now

Pabna University of Science and Technology, Pabna, Bangladesh

    Deputy Director, Center of Excellence in Teaching and Learning (CETL) - 2016

    Khulna University, Khulna, Bangladesh.

    Postdoctoral Fellow: 2014

    Universiti Sains Malaysia (USM), Malaysia.

Postdoctoral Fellow: 2012

University of Quebec in Abitibi-Temiscemingue (UQAT), Canada.

JSPS Postdoctoral Fellow: 2010

Tokyo University of Agriculture and Technology (TUAT), Tokyo, Japan.

Training on Application of Google Earth Engine (GEE) in Forestry: 2021

Forestry and Wood Technology Discipline, Khulna University, Khulna.

Life Cycle Assessment of Engineering Materials: 2019

Khulna University, Bangladesh and CSIRO, Australia.

General Course on Intellectual Property (IP): 2018

World Intellectual Property Organization (WIPO), WIPO Academy, Switzerland.

Life Cycle Assessment (LCA) and Material Flow Analysis (MFA): 2012

Institute of Forestry and Environmental Sciences, Chittagong University, Bangladesh.

First Aid and Cardiovascular System: 2012

Canadian Government.

Training of Trainers on Disaster Management: 2009

Rural Development Academy (RDA), Bogra, Bangladesh.

Geographic Information Systems (GIS) and Remote Sensing: 2004

Urban and Rural Planning Discipline, Khulna University, Bangladesh.

    Adaption in Forest at Adverse Condition and Harvesting of Products from Remote Areas: 1998
    Qadirabad Cantonment, Bangladesh Army.

Stanford University’s “World’s Top 2% Scientists" 3rd Place award in Innovation Exhibition-2024, Category: Research, E-Governance and Innovation Action Plan Committee, Khulna University. WORLD’S TOP 2% SCIENTISTS Best Researcher Award 2022, Khulna University                                                          Post Doctoral Fellowship, Malaysia	2024 2024 2023 2022 2013
Post Doctoral Fellowship, Canada	2012
Japan Society for Promotion of Science (JSPS) Post-Doctoral Fellowship	2010
Excellent Presentation Award by JSPS for the Science Dialogue Program	2011
Japan Govt. Scholarship (Monbukagakusho: MEXT)	2005
Graduate Research Supplement, Asian Institute of Technology (AIT)	2004
Japan Government Scholarship for M.Sc. in AIT	2003
AIT Fellowship for M.Sc. in AIT	2003
Merit Scholarships in Khulna University	1995-2002

Supervision

No Data Available

coming soon...

Journal Articles

Rahman, K. S., Dana, N. H., Rahman, M. N., Mondal, H. S., Chen, L., Islam, M. N., 2024. Degradation of mangrove forests in the Sundarbans: An assessment based on perspectives of mangrove resource collectors using the DPSIR framework. Trees, Forests and People, 100769, https://doi.org/10.1016/j.tfp.2024.100769

Refat, M.K.H., Nishi, F.A., Shubhro, K., Anisuzzaman, M., Ahmed, A., Islam, M.E., Islam, M.N., Islam, K.M.D., Billah, M.M., 2024. Effects of Ultrasound-Assisted Extraction on Physicochemical and Functional Properties of Gelatin Derived from Hilsha (Tenualosa ilisha) Scales. Food Biophysics, 20:14, https://doi.org/10.1007/s11483-024-09903-0

Hossain, M. T., Khan, U. S., Jahan, N., Ahammed, B., Islam, M. A., Rahman, M. M., … Islam, M. N., 2024. “Seen, Yet Unseen”: Predictors of Problematic Pornography Use Among Students During the COVID-19 Pandemic in Bangladesh. Sexual Health & Compulsivity, 1–24. https://doi.org/10.1080/26929953.2024.2397665 

Hassan K.S., Islam M.N., Billah M. M., Islam M. M., Jahan M. S., 2024. Effective extension and access to education drive optimal adoption of climate-smart agriculture interventions in affected tidal floodplains: A case study. Heliyon.  May 21;10(11):e31616. doi: 10.1016/j.heliyon.2024.e31616. PMID: 38828343; PMCID: PMC11140717.

Ratul, S. B., Islam, M.N., Chen, L., 2024. Role of mangrove afforestation in the high saline zone of Bangladesh: Changes of carbon stock with stand age and species composition. Forest Ecology and Management, 563, 122000.

Islam, M.N., Liza, A.A., Dey, M., Das, A.K., Faruk. M.O., Khatun, M.L., Zaman, M.A. and Xi, X. 2024. Bio-based composites from bagasse using carbohydrate enriched cross-bonding mechanism: A formaldehyde-free approach. Carbohydrate Polymer Technologies and Applications, 7(1):100467.

Hossain, M.T., Rahman, K.S., Rahman, M.M., Al-Masud, A., Jahan, N. and Islam, M.N. 2024. Nypa juice collection as an alternative income-generating activity: Does it make any difference between collectors and non-collectors among coastal communities of Bangladesh? Trees, Forests and People, 15, 100505.

Liza, A.A., Ashrafy, A., Islam, M.N., Billah, M.M., Arafat, S.T., Rahman, M.M., Karim, M.R., Hasan, M.M., Promie, A.R. and Rahman, S.M. 2024. Microplastic pollution: a review of techniques to identify microplastics and their threats to the aquatic ecosystem. Environmental Monitoring and Assessment, 196, 285.

Rahman, K.S., Rahman, M.M., Dana, N.H., Adib, A., Al-Masud, A., Hossain, M.T., Rakkibu, M.G., Adhikary, N., Debrot, A.O. and Islam, M.N., 2024. Nypa-based land uses and ecosystem services in the tropics: A review. Ecological Indicators, 159: 111613.

Das, A.K., Islam, M.N., Ghosh, C.K., and Ghosh, R.K. 2023. Physical and mechanical properties of Albizia procera glulam beam. Heliyon, 9(15): e18383.

Islam, M.K., Nasrin, N., Naim, J., Ela, M.Z., Rahman, M.M., Alam, A.S.M., Islam, M.N., Hossain, M.T. 2023. Unraveling the effects of a rehabilitation program on the socioeconomic wellbeing of beggars and begging motivation: evidence from an urban area of Bangladesh. Humanities and Social Sciences Communications, 10(1): 607.

Islam, M.N., Das, A.K., Billah, M.M., Rahman, K.S., Hiziroglu, S., Hattori, N., Agar, D.A. and Rudolfsson, M., 2023. Multifaceted Laser Applications for Wood–A Review from Properties Analysis to Advanced Products Manufacturing. Lasers in Manufacturing and Materials Processing, pp.1-26.

Das, A.K., Islam, M.N., Ghosh, R.K. and Maryana, R., 2023. Cellulose-based bionanocomposites in energy storage applications-A review. Heliyon, p.e13028.

Xu, X., Shen, Y., Zhang, Y., Li, Q., Wang, W., Chen, L., Chen, G., Ng, W.L., Islam, M.N., Punnarak, P. and Zheng, H., 2022. A comparison of 25 complete chloroplast genomes between sister mangrove species Kandelia obovata and Kandelia candel geographically separated by the South China Sea. Frontiers in Plant Science, 13.

Hossain, M., Ahammed, B., Jahan, N., Islam, M.N, Rahman, M., Khan, B., Sarker, M., Ahmed, J., Nibir, M., Hasan, M. and Hasib, M., 2022. Prevalence and predictors of pornography exposure during the third wave of the COVID-19 pandemic: A web-based cross-sectional study on students in Bangladesh. Frontiers in Public Health, 10, p.4684.

Ashrafy, A., Liza, A.A., Islam, M.N., Billah, M.M., Arafat, S.T., Rahman, M.M. and Rahman, S.M., 2022. Microplastics Pollution: A Brief Review of Its Source and Abundance in Different Aquatic Ecosystems. Journal of Hazardous Materials Advances, p.100215.

Nitu, I.P., Rahman, S., Islam, M.N, Ashaduzzaman, M. and Shams, M., 2022. Preparation and properties of jute stick particleboard using citric acid–glycerol mixture as a natural binder. Journal of Wood Science, 68(1), pp.1-9.

Hossain, M.T., Islam, M.A., Jahan, N., Nahar, M.T., Sarker, M.J.A., Rahman, M.M., Deeba, F., Hoque, K.E., Aktar, R., Islam, M.N. and Hossain, M.Z., 2022. Mental health status of teachers during the second wave of the COVID-19 pandemic: a web-based study in Bangladesh. Frontiers in Psychiatry, 13.

Rahman, M.M., Ferdouse, Z., Nur, N., Islam, M.N., Rouf, M.A., Arafat, S.T., Mustafizur Rahman, S. and Rahman, M.M., 2022. Microplastic ingestion alters the expression of some sexually selected traits in a model fish guppy (Poecilia reticulata Peters 1859). Marine and Freshwater Behaviour and Physiology, 55(3-4), pp.87-106.

Ratul, S.B., Gu, X., Qiao, P., Sagala, F.W., Nan, S., Islam, M.N. and Chen, L., 2022. Blue carbon sequestration following mangrove restoration: evidence from a carbon neutral case in China. Ecosystem Health and Sustainability, 8(1), p.2101547.

Nitu, I.P., Rahman, S., Islam, M.N., Ashaduzzaman, M. and Shams, M.I., 2022. Properties of jute stick binderless particleboard reinforced with bagasse pith. Journal of the Indian Academy of Wood Science, 19(1), pp.16-22.

Hossain, M.T., Jahan, N., Ahammed, B., Shohel, T.A., Khan, B. and Islam, M.N., 2022. A psychometric evaluation of fear of COVID-19 scale (FCV-19S). Hellenic Journal of Psychology, 19(1), pp.40-52.

Islam, M. N., Rahman, F., Das, A. K., & Hiziroglu, S. (2022). An overview of different types and potential of bio-based adhesives used for wood products. International Journal of Adhesion and Adhesives, 112, 102992.

Hossain, M.T., Lima, T.R., Ela, M.Z., Khan, L., Ahmed, F., Al Masud, A., Rahman, K.S., Jahan, N., Rahman, S.M. and Islam, M.N., 2022. Livelihood challenges and healthcare-seeking behavior of fishermen amidst the COVID-19 pandemic in the Sundarbans mangrove forest of Bangladesh. Aquaculture, 546, p.737348.

Suhi, S.S., Oyshi, F.J., Al Mamun, M.A., Jahan, N., Shohel, T.A., Rahman, M.A., Islam, M.N. and Hossain, M.T., 2021. Public vs. private job dilemma: Influencing factors in career selection for university graduates. Plos one, 16(10), p.e0258331.

Islam, M.N., Adib, A., Dana, N.H., Das, A.K., Faruk, M.O., Siddique, M.R.H., Agar, D.A., Larsson, S.H., Rudolfsson, M., Ashaduzzaman, M. and Shams, M.I., 2021. Raw natural rubber latex-based bio-adhesive for the production of particleboard: formulation and optimization of process parameters. RSC Advances, 11(46), pp.28542-28549.

Islam, M.N., Rahman, F., Papri, S.A., Faruk, M.O., Das, A.K., Adhikary, N., Debrot, A.O. and Ahsan, M.N., 2021. Water hyacinth (Eichhornia crassipes (Mart.) Solms.) as an alternative raw material for the production of bio-compost and handmade paper. Journal of Environmental Management, 294, p.113036.

Das, A. K., Islam, M.N., Billah, M., & Sarker, A. (2021). COVID-19 and municipal solid waste (MSW) management: a review. Environmental Science and Pollution Research, 28(23), 28993-29008.

Dungani, R., Sumardi, I., Suhaya, Y., Aditiawati, P., Dody, S., Rosamah, E., Islam, M.N., Hartati, S. and Karliati, T., (2021). Reinforcing Effects of Seaweed Nanoparticles in Agar-based Biopolymer Composite: Physical, Water Vapor Barrier, Mechanical, and Biodegradable Properties. BioResources, 16(3).

Islam, M.N., Liza, A. A., Khatun, M. L., Faruk, M. O., Das, A. K., Dey, M., & Akanda, M. J. H. (2021). Formulation and Characterization of Formaldehyde‐Free Chemically Modified Bone‐Based Adhesive for Lignocellulosic Composite Products. Global Challenges, 5(9), 2100002.

Ahammed, B., Jahan, N., Seddeque, A., Hossain, M. T., Khan, B., Mamun, M. A., & Islam, M.N. (2021). Exploring the association between mental health and subjective sleep quality during the COVID-19 pandemic among Bangladeshi university students. Heliyon, 7(5), e07082.

Das, A. K., Islam, M.N., Billah, M. M., & Sarker, A. (2021). COVID-19 pandemic and healthcare solid waste management strategy–A mini-review. Science of the Total Environment, 778, 146220.

Ela, M. Z., Shohel, T. A., Khan, L., Jahan, N., Hossain, M. T., & Islam, M. N. (2021). Prolonged lockdown and academic uncertainties in Bangladesh: A qualitative investigation during the COVID-19 pandemic. Heliyon, 7(2), e06263.

Islam, T., Islam, M.N., Zzaman, W., & Billah, M. M. (2021). Study of antimicrobial, antioxidant and cytotoxicity properties of selected plant extracts for food preservative applications. International Journal of Food Studies, 10.

Islam, M.N., Faruk, M. O., Rana, M. N., Das, A. K., & Habib, A. (2021). Preparation and Evaluation of Rice Bran‐Modified Urea Formaldehyde as Environmental Friendly Wood Adhesive. Global Challenges, 5(6), 2000044.

Shohel, T. A., Hossain, M. T., & Islam, M.N. (2021). Determinants of generalized anxiety, depression, and subjective sleep quality among university students during COVID-19 pandemic in Bangladesh.

Debrot, A.O., Veldhuizen, A., Van Den Burg, S.W., Klapwijk, C.J., Islam, M.N., Alam, M., Ahsan, M., Ahmed, M.U., Hasan, S.R., Fadilah, R. and Noor, Y.R., 2020. Non-timber forest product livelihood-focused interventions in support of mangrove restoration: A call to action. Forests, 11(11), p.1224.

Nitu, I.P., Islam, M.N., Ashaduzzaman, M., Amin, M.K. and Shams, M.I., 2020. Optimization of processing parameters for the manufacturing of jute stick binderless particleboard. Journal of Wood Science, 66(1), pp.1-9.

Hossain, M.T., Ahammed, B., Chanda, S.K., Jahan, N., Ela, M.Z. and Islam, M.N., 2020. Social and electronic media exposure and generalized anxiety disorder among people during COVID-19 outbreak in Bangladesh: a preliminary observation. Plos one, 15(9), p.e0238974.

Das, A.K., Islam, M.N., Faruk, M.O., Ashaduzzaman, M. and Dungani, R., 2020. Review on tannins: Extraction processes, applications and possibilities. South African Journal of Botany, 135, pp.58-70.

Islam, T., Islam, M.N., Zzaman, W. and Billah, M.M. 2020. Study of Antimicrobial, Antioxidant and Cytotoxicity Properties of Selected Plant Extracts for Food Preservative Applications. International Journal of Food Science.

Suhaily, S.S., Islam, M.N., Asniza, M., Rizal, S. and Abdul Khalil, H.P.S. 2020. Physical, mechanical and morphological properties of laminated bamboo hybrid composite: a potential raw material for furniture manufacturing. Materials Research Express, 7(7), 075503.

Das, A.K., Islam, M.N., Ashaduzzaman and Nazhad, M.M. 2020. Nanocellulose: its applications, consequences and challenges in papermaking. J Package Technol Res (2020). https://doi.org/10.1007/s41783-020-00097-7

Rana, M.N., Islam, M.N., Nath, S.K., Das, A.K., Ashaduzzaman, M. and Shams, M.I. 2020. Influence of chemical additive on the physical and mechanical properties of cement-bonded composite panels made from jute stick. Journal of Building Engineering, doi.org/10.1016/j.jobe.2020.101358

Islam, M.N., Liza, A.A., Faruk, M.O., Habib, M.A., Hiziroglu, S. 2019. Formulation and characterization of tamarind (Tamarindus indica L.) seed kernel powder (TKP) as green adhesive for lignocellulosic composite industry. International Journal of Biological Macromolecules, doi: 10.1016/j.ijbiomac.2019.10.027

Islam, M.N., Ratul, S.B., Sharmin, A., Rahman, K.S., Ashaduzzaman, M. and Uddin, G.M.N. 2019. Comparison of calorific values and ash content for different woody biomass components of six mangrove species of Bangladesh Sundarbans. Journal of the Indian Academy of Wood Science, 1-8pp, doi: org/10.1007/s13196-019-00246-9

Rana, M.N., Islam, M.N., Nath, S.K., Das, A.K., Ashaduzzaman, M. and Shams, M.I. 2019. Properties of low density cement-bonded composite panels manufactured from polystyrene and jute stick particles. Journal of Wood Science, 65, doi: org/10.1186/s10086-019-1831-3

Islam, M.N., Dana, N.H., Rahman, KS. Hossain, M.T., Ahmed, M.U. and Sadig, A. 2019. Nypa fruticans Wurmb leaf collection as a livelihoods strategy: a case study in the Sundarbans Impact Zone of Bangladesh. Environment Development and Sustainability., https://doi.org/10.1007/s10668-019-00438-w

Rahman, K.S., Islam, M.N., Ratul, S.B., Dana, N.H., Musa, S.M. and Hannan, M.O. 2018. Properties of flat-pressed wood plastic composites as a function of particle size and mixing ratio. Journal of Wood Science, 64(3): 279–286.

Nath, S.K., Islam, M.N., Rahman, K.S. and Rana, M.N. 2018. Tannin-based adhesive from Ceriops decandra (Griff.) bark for the production of particleboard. Journal of the Indian Academy of Wood Science 15(1): 21-27.

Islam, T., Afrin, N., Parvin, S., Dana, N.H., Rahman, K.S., Zzaman,W. and Islam, M.N. 2018. The impact of chitosan and guava leaf extract as preservative to extend the shelf-life of fruits. International Food Research Journal 25(5): 2056-2062.

Ratul, S.B., Rahman, K.S., Hasan, M.A.W., Islam, M.A., Islam, M.N. and Shams, M.I., 2017. Hybrid particleboard from kadam (Anthocephalus chinensis) reinforced with dhaincha (Sesbania aculeata): effects of particle mixing ratio on physical and mechanical properties. Journal of the Indian Academy of Wood Science, 14(2): 115–121.

Dungani, R., Abdul Khalil, H.P.S., Islam, M.N., Sumardi, I., Aditiawati, P. and Hadiyane, A. 2016. Soil Burial Degradation of Oil Palm Shell (OPS) Nanofiller and Phenol Formaldehyde (PF) Resin-Impregnated Oil Palm Trunk Lumber (OPTL): Dimensional Stability and Mechanical Properties. Journal of Biobased Materials and Bioenergy, 10(4): 258-264.

Sulaeman, A., Dungani, R., Islam, M.N., Abdul Khalil, H.P.S., Sumaradi, I., Hermawan, D. and Hadiyane, A. 2016. Preliminary Study of Characterization of Nanoparticles from Coconut Shell as Filler Agent in Composites Materials. Journal of Materials Science, 1: 1-9.

Alam, N., Rahman, K.S., Ratul, S.B., Sharmin, A., Islam, H. and Islam, N.M., 2015. Properties of particleboard manufactured from commonly used bamboo (Bambusa vulgaris) wastes in Bangladesh. Advances in Research, 4(3), pp.203-211.

Hasan, M.A.W., Islam, T., Rahman, K.S., Ratul, S.B., Islam, M.A., Sharmin, A. and Islam, M.N., 2015. Hybrid particleboard from wood and non-wood species: physical and mechanical properties as a function of particle mixing ratio. Adv Res, 3(5), pp.502-511.  

Abdul Khalil, H.P.S., Hossain, M.S., Rosamah, E., Azli, N.A., Saddon, N., Davoudpoura, Y., Islam, M.N. and Dungani, R. 2015. The role of soil properties and it’s interaction towards quality plant fiber: A review. Renewable and Sustainable Energy Reviews, 43: 1006-1015.

Biswas, S.K., Shams, M.I., Das, A.K., Islam, M.N. and Nazhad, M.M. 2015. Flexible and Transparent Chitin/Acrylic Nanocomposite Films with High Mechanical Strength. Fibers and Polymers, 16(4): 774–781.

Alwani, M.S., Abdul Khalil, H.P.S., Islam, M.N., Sulaiman, O., Zaidon, A. and Dungani, R. 2015. Microstructural Study, Tensile Properties and Scanning Electron Microscopy Fractography Failure Analysis of Various Agricultural Residue Fibres. Journal of Natural Fibres, 12(2): 154-168.

Alwani, M.S., Abdul Khalil, H.P.S., Islam, M.N., Wan Nadirah, W.O.  and Dungani, R.  2014. Fundamental approaches of pineapple leaf fibre for the application in high performance reinforced composites. Polimery, 59: 798-802.

Sasthiryar, S., Abdul Khalil, H.P.S., Ahmad, Z.A., Islam, M.N., Dungani, R. and Fizree, H.M. 2014. Carbon Nanofiller-enhanced ceramic composites: thermal and electrical Studies. BioResources, 9(2): 3143-3151.

Abdul Khalil, H.P.S., Davoudpour, Y., Islam, M.N., Mustapha, A., Sudesh, K., Dungani, R. and Jawaid, M. 2014. Production and modification of nanofibrillated cellulose using various mechanical processes: A review. Carbohydrate Polymers 99: 649-665.

Alwani, M.S., Abdul Khalil, H.P.S., Sulaiman, O., Islam, M.N. and Dungani, R. 2014. An approach of using agricultural waste fibres in biocomposites application: Thermogravimetric analysis and activation energy study. BioResources 9(1): 218-230.

Naher, I., Das, A.K., Biswas, S.R. and Islam, M.N. 2014. Enhencement of Life Span of Mahogany (Swietenia macrophylla), Raintree (Albizia saman) and Akashmoni (Acacia auriculiformis) Wood Treating with CCB Preservative. Asian Journal of Applied Sciences, 7(1): 38-44.

Dungani, R., Islam, M. N., Abdul Khalil, H.P.S., Davoudpour, Y. and Rumidatul, A. 2014. Modification of the Inner Part of the Oil Palm Trunk (OPT) with Oil Palm Shell (OPS) Nanoparticles and Phenol Formaldehyde (PF) Resin: Physical, Mechanical, and Thermal Properties. BioResources 9(1): 455-471.

Sasthiryar, S., Abdul Khalil, H.P.S., Bhat, A.H., Ahmad, Z.A., Islam, M.N., Zaidon, A. and Dungani, R. 2014. Nanobioceramic Composites: A Study of Mechanical, Morphological, and Thermal Properties. BioResources 9(1): 861-871.

Islam, M.N., Ando, K., Yamauchi, H., Kamikawa, D., Harada, T., Abdul Khalil, H.P.S. and Hattori, N. 2014. Impregnation of laser incised wood of Douglas fir and Japanese cedar by dipping (passive impregnation) in solutions of copper azole (CuAz-B) and fire retardant (PPC). Holzforschung, 68(3): 353-360.

Rahman, K.S., Islam, M.N., Rahman, M.M., Hannan, M.O., Dungani, R. and Abdul Khalil, H.P.S. 2013. Flat-pressed wood plastic composites from sawdust and recycled polyethylene terephthalate (PET): physical and mechanical properties. SpringerPlus 2: 629.

Islam, M.N., Dungani, R., Abdul Khalil, H.P.S., Siti Alwani, M., Wan Nadirah, W.O. and Fizree, H.M.. 2013. Natural weathering studies of oil palm trunk lumber (OPTL) green polymer composites enhanced with oil palm shell (OPS) nanoparticles. SpringerPlus 2: 592.

Habib, M.A., Muslim, M., Shahadat, M.T., Islam, M.N., Ismail, I.M.I., Islam, T.S.A. and Mahmood, A.J. 2013. Photocatalytic decolorization of crystal violet in aqueous nano-ZnO suspension under visible light Irradiation. Journal of Nanostructure in Chemistry, 3:70.

Dungani, R., Islam, M. N., Abdul Khalil, H. P. S, Hartati, S., Abdullah, C. K., Dewi, M. and Hadiyane, A. 2013. Termite resistance study of oil palm trunk lumber (OPTL) impregnated with oil palm shell meal and phenol-formaldehyde resin. BioResources 8(4), 4937-4950.

Dungani, R., Jawaid, M., Abdul Khalil, H.P.S., Jasni, S.A., Hakeem, K.R., Hartati, S. and Islam, M.N. 2013. A Review on Quality Enhancement of Oil Palm Trunk Waste by Resin Impregnation: Future Materials. BioResources 8(2): 3136-3156.

Islam, M.N., Ando, K., Yamauchi, H. Kamikawa, D., Harada, T. and Hattori, N. 2013. Impregnation of Preservative and fire retardants into Japanese cedar lumber by passive impregnation. BioResources, 8(1): 395-404.

Islam, M.N., Rahman, K.S. and Alam, M.R., 2012. Comparative study on physical and mechanical properties of plywood produced from eucalyptus (Eucalyptus camaldulensis Dehn.) and simul (Bombax ceiba L.) veneers. Research Journal of Recent Sciences  ISSN, 2277, p.2502.

Ando, K., Islam, M.N., Yamauchi, H. and Hattori, N. 2012. Effect of steam injection redrying of Japanese cedar on preservative leaching after passive impregnation. Wood Material Science and Engineering, 7(4): 196-201.

Islam, M.N., Rahman, K.S., Bahar, M.M., Habib, M. A., Ando. K. and Hattori, N. 2012. Pollution attenuation by roadside greenbelt in and around urban areas. Urban Forestry & Urban Greening, 11(4): 460-464.

Rahman, K.S., Alam, D.M.N. and Islam, M.N. 2012. Some physical and mechanical properties of bamboo mat-wood veneer plywood. Journal of Biological Sciences, 1(2): 61-64.

Islam, M.N., Ando, K., Yamauchi, H. and Hattori, N. 2011. Change of temperature and pressure in dry and green douglas-fir and sugi wood during passive impregnation method. Wood and Fiber Science, 43(3): 305-310.

Ando, K., Islam, M.N., Yamauchi, H. and Hattori, N. 2011. Preservative leaching from copper azole treated lumber: a comparison between full-cell method and passive-impregnation method. Forest Products Journal, 61(3): 270-272.

Karim, M.R., Islam, M.N. and Malinen, R.O. 2011. Partial replacement of chlorine dioxide with ozone in prebleaching of Acacia mangium kraft pulp. Nordic Pulp and Paper Research Journal, 26(4): 392-397.

Rahman, K.S., Islam, M.N., Musa, S.M. and Alam, D.M.N. 2011. Incising as an aid for the preservative treatment of wood – a review. Recent Patents on Materials Science, 4(3): 201-208.

Islam, M.S., Ashaduzzaman, M., Islam, M.N., Karim, M.R. and Hannan, M.O. 2011. Preservative treatment of keora (Sonneratia apetala) poles by full cell method of wood preservation with CCA preservative. Bangladesh Journal of Scientific and Industrial Research, 46(4): 425-428.

Karim, M.R., Islam, M.N. and Malinen, R.O. 2010. Response of Eucalyptus camaldulensis and Acacia mangium kraft pulp in different ECF bleaching options. Journal of Wood Science and Technology, 45(3): 473-485.

Islam, M.N., Ando, K., Yamauchi, H. and Hattori, N. 2009. Preservative treatment of Douglas-fir lumber by the passive impregnation method with copper azole. European Journal of Wood and Wood Products, 67(1): 77-81.

M. N. Islam, K. Ando, H. Yamauchi and N. Hattori, 2009. Effects of species and moisture content on penetration of liquid in laser incised lumber by the passive impregnation method. European Journal of Wood and Wood Products, 67(2): 129-133.

Ashaduzzaman, M., Islam, M.S., Hannan, M.O. and Islam, M.N. 2009. Effect of preservative treatment by CCA-C preservative on strength Properties of Sonneratia apetala Butch. – Hum. wood. Journal of Indian Academy of Wood Science, 4(2): 34-29.

Islam, M.N., Ando, K., Yamauchi, H. and Hattori, N. 2008. Comparative study between full cell and passive impregnation method of wood preservation for laser incised Douglas fir lumber. Journal of Wood Science and Technology, 42(4): 343-350.

Zaman, M. K., Saha, S. K., Bose, A.K. and Islam, M.N. 2008. Effects of age and height on physical and mechanical properties of bamboo. Journal of Tropical Forest Science, 20(3): 211-217.

Islam, M.N., Karim, M.R. and Malinen, R.O. 2008. Beneficial effects of fungal treatment before pulping and bleaching of Acacia mangium and Eucalyptus camaldulensis. Turkish Journal of Agriculture and Forestry, 32(4): 331-338.

Islam, M.N., Ando, K., Yamauchi, H., Kobayashi, Y. and Hattori, N. 2007. Passive impregnation of liquid in impermeable lumber incised by laser. Journal of Wood Science, 53(5): 436-441.

Rahman, M.S. Mahfuz, A.A., Zaman, M.K. and Islam, M.N. 2006. Social forestry as a strategy for women’s empowerment with particular reference to Jessore district. Indian Journal of Forestry, 29(4): 373-378.

Islam, M.N., Mahfuz, A.A., Hannan, M.O. and Islam, M.A. 2006. Manufacture and properties of particleboard from Dhaincha (Sesbania aculeata). Journal of Biological Sciences, 6(2): 417-419.

Hannan, M.O., Huda, A.S.M.A., Islam, M.N. and Islam, M.A. 2005. Indigenous technology for the production of sap from Nipa and its properties. Journal of the Timber Development Association of India, 51(3&4): 42-48.

Haque, S.M.S., Islam, M.N., Hannan, M.O., Saha, S.K. and Zaman, M.K. 2005. Suitability of using sawdusts of five different tree species with rice husk for the production of briquette. Journal of the Timber Development Association of India, 51(3&4): 70-78.

Kabir, M.E., Mowla, R. and Islam, M.N. 2005. People`s preference, participation and perception towards community forestry woodlot (CFW): a case of community foresry project in Dhaka Forest Division, Bangladesh. Khulna University Studies, 5(1): 732-737.

Islam, M.N. 2004. Effect of chemical charges on cooking and their effectiveness on pulp bleaching. Journal of Scientific and Industrial Research, 63: 522-526.

Hannan, M.O., Huda, A.S.M.A., Saha, A.K. and Islam, M. N. 2004. Effects of preservative treatment by CCA on mechanical properties of sundri (Heritiera fomes Buch-Ham.) and raintree [Samanea saman (Jacq.) Mer.] wood. Journal of Forestry and Environment, 2: 1-5.

Islam, M.S., Islam, M.N., Kabir, M.E. and Zaman, M.K. 2002. A comparative study of some forestry activities between government and the NGOs in Khulna, Satkhira and Bagerhat districts in Bangladesh. Khulna University Studies, 4(1): 699-706.

Islam, M.N., Hannan, M.O. and Lahiry, A.K. 2002. Effect of age and height positions of borak, jawa and mitinga bamboo on their physical properties. Journal of the Timber Development Association of India, 48(1&2): 16-23.

Hannan, M.O., Islam, M.N. and Islam, M.N. 2001. A study on physical properties of two bamboo species - borak (Bambusa balcooa Roxb.) and jawa (Bambusa salarkhanii Alam) of Bangladesh. Khulna University Studies, 3(2): 537-540.

Book Chapters

Das, A.K. and Islam, M.N., 2023. Applications of organic-based nanocomposites in corrosion protection. In Nanocomposites-Advanced Materials for Energy and Environmental Aspects (pp. 579-590). Woodhead Publishing.

Das, A.K. and Islam, M.N., 2023. Developments of nanocomposites in supercapacitor applications. In Nanocomposites-Advanced Materials for Energy and Environmental Aspects (pp. 209-223). Woodhead Publishing.

Das, A.K. and Islam, M.N., 2023. Nanocomposites in energy storage applications. In Nanocomposites-Advanced Materials for Energy and Environmental Aspects (pp. 175-187). Woodhead Publishing.

Das, A.K., Islam, M.N., Akter, A., Promie, A.R., Billah, M.M. and Akanda, M.J.H., 2022. Natural Fiber-based Nanocomposites as Corrosion Inhibitors. In Anticorrosive Nanomaterials (pp. 191-206).

Das, A. K., Islam, M. N., Liza, A. A., & Promie, A. R. Performance of Natural Fiber Based Nanocomposites Under Environmental Aging Conditions. Aging Effects on Natural Fiber-Reinforced Polymer Composites: Durability and Life Prediction, 279.

Lima, T. R., Ela, M. Z., Khan, L., Hossain, M. T., Jahan, N., Rahman, K. S., ... & Islam, M. N. (2021). Livelihood and health vulnerabilities of forest resource-dependent communities amidst the COVID-19 pandemic in southwestern regions of Bangladesh. In Environmental Resilience and Transformation in Times of COVID-19 (pp. 343-356). Elsevier.

Lima, T.R., Ela, M.Z., Khan, L., Hossain, M.T., Jahan, N., Rahman, K.S., Ahsan, M.N. and Islam, M.N., 2021. Livelihood and health vulnerabilities of forest resource-dependent communities amidst the COVID-19 pandemic in southwestern regions of Bangladesh. In Environmental Resilience and Transformation in Times of COVID-19 (pp. 343-356). Elsevier.

Ela, M.Z., Rabya, T., Khan, L., Rahman, M., Shovo, T.E., Jahan, N., Hossain, M. and Islam, M., 2021. Climate Change and Livelihood Vulnerabilities: The Forest Resource-Dependent Communities of the Sundarbans of Bangladesh. In Climate Vulnerability and Resilience in the Global South (pp. 341-352). Springer, Cham.

Das, A.K., Islam, M.N., Faruk, M.O., Ashaduzzaman, M., Dungani, R., Rosamah, E., Hartati, S. and Rumidatul, A., 2019. Hardwood tannin: sources, utilizations, and prospects. In Tannins-Structural Properties, Biological Properties and Current Knowledge. IntechOpen.

Nitu, I.P., Shams, M., Islam, M., Ratul, S.B. and Ashaduzzaman, M., 2018. Development of binderless composites from different nonwood lignocellulosic materials: Overview. Handbook of ecomaterials. Springer, Cham, pp.1-15.

Islam, M.R., Rahman, F., Islam, M.N., Rana, M.N., Nath, S.K., Ashaduzzaman, M. and Shams, M.I., 2018. Cement-bonded lignocellulosic panel (CLP): A promising environmental friendly construction material for conservation of forest resources. Handbook of Ecomaterials; Springer: New York, NY, USA, pp.1-13.

Rahman, F., Islam, M.N., Faruk, M.O., Ashaduzzaman, M. and Shams, M.I. 2019. Cellulosic Biofuel: Technologies, Prospects, and Challenges. In: L.M.T. Martínez, O.V. Kharissova, B. I. Kharisov (eds.), Handbook of Ecomaterials, Springer, Cham.

Islam, M.N. and Rahman, F., 2019. Production and modification of nanofibrillated cellulose composites and potential applications. In Green composites for automotive applications (pp. 115-141). Woodhead Publishing.

Dungani, R., Aditiawati, P., Islam, M.N., Aprilia, N.A.S., Hartati, S., Sulaeman, A., Sumardi, I., Karliati, T. and Yuniarti, K., 2019. Evaluation of the effects of decay and weathering in cellulose-reinforced fiber composites. In Durability and Life Prediction in Biocomposites, Fibre-Reinforced Composites and Hybrid Composites (pp. 173-210). Woodhead Publishing.

Khalil, H.A., Alwani, M.S., Islam, M.N., Suhaily, S.S., Dungani, R., H’ng, Y.M. and Jawaid, M., 2015. The use of bamboo fibres as reinforcements in composites. In Biofiber reinforcements in composite materials (pp. 488-524). Woodhead Publishing.

Khalil, H.P.S.A., Davoudpour, Y., Aprilia, N.S., Mustapha, A., Hossain, S., Islam, N. and Dungani, R., 2014. Nanocellulose-based polymer nanocomposite: isolation, characterization and applications. Nanocellulose polymer nanocomposites, pp.273-309.

Dungani, R., Khalil, H.P.S., Sumardi, I., Suhaya, Y., Sulistyawati, E., Islam, M., Suraya, N.L.M. and Aprilia, N.A., 2014. Non-wood renewable materials: Properties improvement and its application. In Biomass and Bioenergy (pp. 1-29). Springer, Cham.  

 

Conference Presentation/Proceedings

Hossain, M.T., Shohel, T. and Islam, M.N. , 2024. Prevalence of Household Dietary Diversity and Associated Factors among Sundarbans Mangrove Forest Resource-dependent Communities in Southwestern Coastal Bangladesh. 3^rd International Conference on Innovation and Transformation For Development (ITD), on 9-10 November 2024. 

Islam, M.N. 2024. Bioadhesives for Wood-based Industries: Problems Related to Water Absorptions and the Potentials.China-South Asia and Southeast Asia Forestry Education Collaboration Symposium in Forest Products Education. Manual Handbook conference, Kunming China, 11-14 October, 2024.

Tanvir, M.S.S.I., Nabi, M.N.U., Hossain, M.T., and Islam, M.N. 2024. Value Chain and Market Potential Analysis of Nypa Sap and molasses from the Southern Coastal Region of Bangladesh. MDPI in The 4th International Electronic Conference on Forests session Wood Science, Production Chains, Fuelwood and Trade, sciforum, https://sciforum.net/paper/view/18332.

Sarker, K., Mim, S.H., Saha, D., and Islam, M.N. 2024.Preparation and Evaluation of Lignin and Phytogenic Protein (Mustard Oil Cake)-based Bioadhesive. MDPI in The 4th International Electronic Conference on Forests session Wood Science, Production Chains, Fuelwood and Trade, sciforum, https://sciforum.net/paper/view/18354.

Islam, M.N. and Mim, S.H. 2024. Preparation and evaluation of fish scale collagen protein as bioadhesive. Materials Science Conference – Global Edition, April 8-9, 2024, Hilton Hotel Fort Lee – George Washington Bridge at Fort Lee, New Jersey, USA.

Hossain, M.T., Shohel, T. and Islam, M.N. 2024. Prevalence and predictors of vulnerability among forest resource-dependent communities in southwestern coastal Bangladesh. 1st Development Studies International Conference 2024, May 2024. 10.13140/RG.2.2.18931.75048

Hossain, M.T., Shohel, T. and Islam, M.N. 2024. As assessment of the vulnerability of the Sundarbans mangrove forest resource-dependent communities in cyclone-prone southwestern coastal Bangladesh. 2^nd International Conference on Environment: Time for Nature and Natural Resource Management, Khulna University, Bangladesh, March 2-3, 2024.

Nandi, N., Mim, S.H., Khan, M.N.H., Islam, M.N. and Adhikary, N. 2024. A quantitative study on the soil quality of the Sundarbans mangrove forest of Bangladesh. 2nd International Conference on Environment: Time for Nature and Natural Resource Management, Khulna University, Bangladesh, March 2-3, 2024.

Khan, M.N.H., Nandi, N., Islam, M.N. and Adhikary, N. 2024. Nutrient status of the Sundarbans forests soil in the southern region of Bangladesh. 2nd International Conference on Environment: Time for Nature and Natural Resource Management, Khulna University, Bangladesh, March 2-3, 2024.

Debrot, A.O., Rejeki, S., Pribadi, R. and Islam, M.N., 2022. Options for mangrove-friendly alternativelivelihoods in the mangrove ecosystem (Opsi Mata Pencaharian Alternatif di Ekosistem Mangrove yang RamahLinggunkan) (No. C075/22). Wageningen Marine Research.

Khatun, A., Faruk, M.O., Das, A.K., Rana, M.N., Ashaduzzaman, M. and Islam, M.N. 2018. Evaluation of pulp quality of banana plant (Musa acuminate) pseudo stem and its suitability as an alternative source of raw material. International Conference on Biocomposites and Nanocomposites, October 25-26, 2018, Khulna, Bangladesh.

Tasnim, T., Rahman, S., Ratul, S.B., Islam, M.N., Ashaduzzaman, M. and Shams, M.I. 2018. Environmental friendly cross-banded board from jute stick. International Conference on Biocomposites and Nanocomposites, October 25-26, 2018, Khulna, Bangladesh.

Saha, A.K., Islam, M.N., Dana, N.H., Rahman, K.S. Ashaduzzaman, M. and Shams, M.I. 2018. Natural rubber latex based bioadhesive for manufacturing of jute stick particleboard: effect of adhesive mixing ratios on the properties. International Conference on Biocomposites and Nanocomposites, October 25-26, 2018, Khulna, Bangladesh.

Shoshi, M.A., Rahman, S., Ashaduzzaman, M., Islam, M.N. and Shams, M.I. 2018. Manufacturing of citric acid-sucrose treated cross bonded jute stick board. International Conference on Biocomposites and Nanocomposites, October 25-26, 2018, Khulna, Bangladesh.

Faruk, M.O., Islam, M.N., Rana, M.N. and Ashaduzzaman, M. 2018. Preparation and evaluation of environmental friendly adhesive from rice bran. International Conference on Biocomposites and Nanocomposites, October 25-26, 2018, Khulna, Bangladesh.

Mondal, S.K., Hasan, S.A., Ashaduzzaman, M., Islam, M.N. and Shams, M.I. 2018. Polyphenolic content of barks from Acacia nilotica and Acacia auriculiformis: potential sources of bio-resin. International Conference on Biocomposites and Nanocomposites, October 25-26, 2018, Khulna, Bangladesh.

Nitu, I.P., Ratul, S.B., Islam, M.N., Nath, S.K. Ashaduzzaman, M. and Shams, M.I. 2018. Optimization of processing parameters for manufacturing jute stick particleboard. International Conference on Biocomposites and Nanocomposites, October 25-26, 2018, Khulna, Bangladesh.

Rana, M.N., Islam, M.N., Nath, S.K. Ashaduzzaman, M. and Shams, M.I. 2018. Manufacture of cement-bonded composites from agricultural residues: effect of CaCl₂ and MgCl₂ on setting time of cement-bonded composite. International Conference on Biocomposites and Nanocomposites, October 25-26, 2018, Khulna, Bangladesh.

Rahman, S., Ratul, S.B., Islam, M.N., Ashaduzzaman, M. and Shams, M.I. 2018. Manufacturing of citric acid treated cross banded jute stick board. International Conference on Biocomposites and Nanocomposites, October 25-26, 2018, Khulna, Bangladesh.

Islam, M.N., Dana, N.H. and Rahman, K.S. 2017. Nypa fruticans leaf collection as a livelihood strategy: A case study in the Sundarbans Impact Zone of Bangladesh. International Conference on Social Research and Innovation, November 17-19, 2017, Villa College, Maldives.

Islam, M.N., Ando, K., Listyanto, T., Yamauchi, H. and Hattori, N. 2011. Effects of Steam Redrying of Cryptomeria japonica on Leaching after Passive Impregnation Method of Wood Preservation. The 3rd International Symposium of Indonesian Wood Research Society (IWoRS), November 3-4, 2011, Jugyakarta, Indonesia.

Listyanto, T., Islam, M.N., Ando, K., Yamauchi, H. and Hattori, N. 2011. Moisture distribution and permeability of CO₂ laser incised sugi lumber dried by steam injection and microwave. The 3rd International Symposium of Indonesian Wood Research Society (IWoRS), November 3-4, 2011, Jugyakarta, Indonesia.

Islam, M.N., Ando, K., Listyanto, T., Yamauchi, H. and Hattori, N. 2011. Efficacy of steam redrying of sugi wood after passive impregnation method of wood preservation. The 61th Annual Meeting of the Japan Wood Research Society, March 18-20, 2011, Kyoto, Japan.

Listyanto, T., Pratama, A.A., Ando, K., Islam, M.N. and Hattori, N. 2011. Fire resistance of mahogany treated with sodium tetraborate and boric acid in different concentration and pressure. The 61th Annual Meeting of the Japan Wood Research Society, March 18-20, 2011, Kyoto, Japan.

Hattori, N., Islam, M. N., Ando, K. and Yamauchi, H. 2008. Effects of moisture content and species on penetration of liquid in laser incised lumber by the passive impregnation method IRG Document # IRG/WP 08-40408. The International Research Group (IRG) on Wood Protection Conference, Istanbul, Turkey, May 25-29, 2008.

Islam, M.N., Ando, K., Yamauchi, H. and Hattori, N. 2008. Preservative treatment of Douglas-fir with copper azole by passive impregnation method. Paper presented at the 58th Annual Meeting of the Japan Wood Research Society, March 17-19, 2008, Tsukuba, Japan.

Islam, M.N., Ando, K., Yamauchi, H., Kobayashi, Y. and Hattori, N. 2007. Penetration analysis of different species and effect of wood moisture content for the passive impregnation of incised sugi lumber. Paper presented at the 57th Annual Meeting of the Japan Wood Research Society, August 8-10, 2007, Hiroshima, Japan.

Islam, M.N., Ando, K., Yamauchi, H., Kobayashi, Y. and Hattori, N. 2007. Comparative study between full cell and passive impregnation method of wood preservation for laser incised Douglas-fir lumber, IRG Document # IRG/WP 07-60232. The International Research Group (IRG) on Wood Protection Conference, Wyoming, USA, May 20-24, 2007.

Hattori, N., Islam, M.N., Ando, K., Yamauchi, H. and Kobayashi, Y. 2007. Penetration of liquid into laser incised lumber by the passive impregnation. The 18th International Wood Machining Seminar, May 7-9, 2007, Vancouver, Canada.

Islam, M.N., Ando, K., Yamauchi, H., Kobayashi, Y. and Hattori, N. 2006. Passive impregnation of liquid in impermeable lumber by laser incising. Paper presented at the 56th Annual Meeting of the Japan Wood Research Society, August 8-10, 2006, Akita, Japan.

Huda, S.M.A., Mithue, S.M., Islam, M.N. and Hannan, M.O. 2006. Comparative study between dipping and Boucherie method of bamboo preservation, IRG Document # IRG/WP 06-40324. The International Research Group (IRG) on Wood Protection Conference, Tromsoe, Norway, June 18-22, 2005.

Malinen, R.O., Islam, M.N. and Karim, M. R. 2005. Beneficial effects of fungal treatment before pulping and bleaching of Acacia mangium and Eucalyptus camaldulensis. Proceedings of 59th APPITA annual conference and exhibition, May 16-19, 2005, Auckland, New Zealand.

Islam, M.N., Huda, A.S.M.A., Saha, A.K. and Mithue, S.M. 2003. Preservative treatement of two bamboo species - borak (Bambusa balcooa Roxb.) and Talla (Bambusa tulda Roxb.) by Boucherie method. IRG Doculment # IRG/WP 03-40262. The International Research Group (IRG) on Wood Protection Conference, Brisbane, Queensland, Australia, May 18-23, 2003.

Islam, M.N., Lahiry, A.K.  and Hannan, M.O. 2002. Treatability and retainability of two important bamboo species - borak and jawa of Bangladesh. IRG Document # IRG/WP 02-40248. The International Research Group (IRG) on Wood Protection Conference, Cardiff, Wales, United Kingdom; May 12-17, 2002.

Hannan, M.O., Lahiry, A.K. and Islam, M.N. 2002. Penetration analysis of two common bamboo species - borak and jawa of Bangladesh. IRG Document # IRG/WP 02-40247. The International Research Group (IRG) on Wood Protection Conference, Cardiff, Wales, United Kingdom; May 12-17, 2002.

 

Pulp and Paper Technology Sessional/Field Work Core Running

Wood Seasoning and Preservation Sessional/Field Work Core Running

Pulp and Paper Technology  This course helps to gain an in-depth overview of the entire pulp & paper mill’s major processes for the students at undergraduate level, including: ·         Wood & Fiber Raw Materials ·         Pretreatment of Chips and Pulping Processes ·         Pulp Processing, including Bleaching ·         Paper Mill Refining ·         Wet End Additives ·         Paper Machine Operations ·         Chemical Recovery  ·         Coating ·         Recycling ·         Environmental Control Running

Wood Seasoning and Preservation Core Running

• Pulp and Paper Technology Sessional/Field Work

• Wood Seasoning and Preservation Sessional/Field Work

• Pulp and Paper Technology

• Wood Seasoning and Preservation